ACR38 Reference Manual version 1.9 February 2006
Appendix A: Supported Card Types
The following table summarizes which values must be specified in the SET_CARD_TYPE command for a
particular card type to be used, and how the bits in the response to the GET_ACR_STAT command
correspond with the respective card types.
Cyber-mouse card type code Card Type
00
H
Auto-select T=0 or T=1 communication protocol
01
H
I2C memory card (1k, 2k, 4k, 8k and 16k bits)
02
H
I2C memory card (32k, 64k, 128k, 256k, 512k and 1024k bits)
03
H
Atmel AT88SC153 secure memory card
04
H
Atmel AT88SC1608 secure memory card
05
H
Infineon SLE4418 and SLE4428
06
H
Infineon SLE4432 and SLE4442
07
H
Infineon SLE4406, SLE4436 and SLE5536
0C
H
MCU-based cards with T=0 communication protocol
0D
H
MCU-based cards with T=1 communication protocol
Advanced Card Systems Ltd. Page 41 of 43
To Next Page
