Why does my Acson international A5RT-C compressor run continuously?
The compressor might be running continuously due to a dirty air filter or incorrect temperature settings. Try cleaning the air filter. If you're cooling, use a higher temperature setting. If you're heating, use a lower temperature setting.
What to do if there's condensation on the front air grille of my Acson international A5RT-C Air Conditioner?
Condensation on the front air grille of your Acson international Air Conditioner indoor unit is likely due to high air humidity or a low temperature setting after prolonged operation. Try increasing the temperature setting and operating the unit at a high fan speed.
How to fix bad odor from the Acson international A5RT-C discharge airflow?
If the discharge airflow from your Acson international Air Conditioner has a bad odor, it may be due to cigarettes, smoke particles, perfume, or other substances adhered to the coil. Contact your nearest dealer for assistance.
What to do if water is flowing out from my Acson international Air Conditioner?
If water is flowing out from your Acson international Air Conditioner, it might be due to tilted installation. Switch off the unit and contact your nearest dealer.
Why doesn't the Acson international A5RT-C Air Conditioner compressor operate immediately after starting?
The compressor on your Acson international Air Conditioner might not start immediately due to a protection against frequent starting. Wait for 3 to 4 minutes; the compressor should start operating by itself.
General| Brand | Acson international |
|---|---|
| Model | A5RT-C Series |
| Category | Air Conditioner |
| Language | English |
Overview of the A5RT-C series main advantages and performance highlights.
Details the high-efficiency, low-noise, hermetically sealed scroll compressors used.
Details the refrigerant circuit design, including expansion valves and pressure switches.
Provides essential safety warnings and precautions for installation and maintenance.
Details the required space around the unit for proper installation and service.
Provides specifications for power and earth cable sizes and breaker capacities.
Presents sound pressure levels in dB across different octave bands and overall.
Provides sound power levels in dB ref 1pW across octave bands and overall.
Details the drive package selection process, including pulley and belt calculations.
Presents detailed engineering specifications for the R410A model units.
Provides important cautions for compressor operation and testing procedures.
Lists points to consider for safe operation and to prevent malfunction.
Lists common fault conditions and their possible causes and corrective actions.
To Next Page