Hardware Manual
31
Connect to Network
Connect the other end of the network cable to a switch or injector. Then, connect the switch or
injector to a network, PC, and a power source. See Power-over-Ethernet (PoE) connection
example below.
Ethernet Cable
(Data + Power)
NOTE: Use only the supplied power adapter and power cord that came with the camera or the
optional High PoE Injector available for purchase. Using other accessories not approved by the
manufacturer may cause damage to the equipment.
See Accessing the Camera on page 40 for more information on how to access the Live View of
the camera.
To Next Page
Loading...
