Need help?Do you have a question about the ACTi Z Series and is the answer not in the manual?
Defines symbols used in the manual for hazard warnings and information.
Steps to prepare for logging into the camera's web interface.
Optional steps to adjust user account control settings for secure access.
Configure local settings for the PC and camera parameters.
Modify communication settings like IP address for camera connectivity.
Configure dynamic IP address acquisition for the camera.
Set up Domain Name Service for accessing the camera via domain name.
Configure network ports for HTTP, HTTPS, and RTSP.
Set up port forwarding for external access to camera services.
Configure Dynamic Domain Name Service for remote access.
Configure email settings for alarm notifications.
Configure SNMP settings for network management.
Set Quality of Service parameters for network traffic priority.
Configure FTP settings for uploading snapshots.
Adjust general image parameters for better visual quality.
Configure scene-specific image parameters and auto-switching.
Fine-tune image brightness, saturation, contrast, and sharpness.
Adjust camera exposure settings like shutter speed and gain.
Adjust image clarity in fog or haze conditions.
Enable or disable image dewarping for fisheye correction.
Configure lens settings like iris control and aperture.
Control IR illumination based on lighting conditions.
Set camera focus modes for different scenarios.
Adjust color balance for accurate image representation.
Configure on-screen display of text and information on video.
Set privacy masks to cover sensitive areas in the video feed.
Set video compression, resolution, and frame rate.
Configure audio input, compression, and noise suppression.
Configure settings for taking still images from the video stream.
Ensure image quality for specific areas of interest.
Set up media stream transmission protocols and destinations.
Configure RTSP multicast addresses for streaming.
Detect objects crossing a virtual line in the video.
Detect objects entering a specified area.
Set up motion detection areas, sensitivity, and triggers.
Configure alarms for unauthorized camera tampering.
Set up alarms based on audio input volume changes.
Enable continuous video recording to the memory card.
Schedule video recording to the memory card.
Manage administrator and common user accounts for camera access.
Configure secure data transmission settings like HTTPS and SSL certificates.
Configure RTSP/HTTP authentication, ARP protection, and IP filtering.
Manage access policies and hide vendor information.
Add watermarks to video to prevent alteration.
Manually set or synchronize the device's system time.
Synchronize camera time using an NTP server.
Configure Daylight Saving Time settings.
View the current operational status of the camera.
Perform firmware upgrades for the camera.
Restart the camera system.
Backup and restore camera configuration settings.
Export logs and system configurations for troubleshooting.
Understand and use the controls in the live view interface.
Zoom into specific areas of the live video feed, including digital zoom.
General| Series | Z Series |
|---|---|
| Resolution | 1920 x 1080 |
| Day/Night | Yes |
| IR Cut Filter | Yes |
| WDR | Yes |
| Frame Rate | 30 fps |
| Ingress Protection | IP67 |
| Vandal Resistance | IK10 |
| Image Sensor | 1/2.8" CMOS |
| Lens Type | Fixed |
| Minimum Illumination | 0.05 Lux (Color) |
| Video Compression | H.264, MJPEG |
| Audio | Yes |
| Local Storage | MicroSD/SDHC/SDXC |
| Ethernet | 10/100 Mbps |
| Power | PoE |
| Power Supply | PoE |
| Operating Temperature | -30°C ~ 60°C |
To Next Page
