Need help?Do you have a question about the ACTi E83 and is the answer not in the manual?
Guidelines for servicing the video device, emphasizing professional qualified personnel.
Conditions under which the video device requires professional servicing due to damage.
Guides through initial setup steps: cover removal, cable insertion, and initial viewing/focus adjustments.
Details the components of the conduit gland and the initial disassembly for installation.
Step-by-step guide for pulling cable through flex conduit and sealing the connection.
Explains using DHCP or Manual IP assignment, including the IP Utility tool.
General| Sensor Type | CMOS |
|---|---|
| Focal Length | 2.8 mm |
| Aperture | F2.0 |
| IR Cut Filter | Yes |
| Day/Night | Yes |
| Wireless | No |
| ONVIF | Yes |
| Weatherproof | IP66 |
| Vandal Proof | IK10 |
| Environment | Outdoor |
| Image Sensor Type | Progressive Scan CMOS |
| Lens Type | Fixed |
| IR Distance | 30 m |
| Video Compression | H.264, MJPEG |
| Frame Rate | 30 fps |
| Audio | No |
| Ethernet | Yes |
| Network Interface | RJ-45 |
| Protocols | TCP, UDP, HTTP, HTTPS, SMTP, FTP, NTP, DNS, DDNS, DHCP, ARP, IPv4, IPv6, RTP, RTSP, RTCP, ICMP, IGMP |
| Local Storage | microSDHC/microSDXC |
| Power Supply | PoE (802.3af) |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Model | ACTi E83 |
To Next Page
