Need help?Do you have a question about the ACTi E38 and is the answer not in the manual?
Covers safety instructions, warnings, and servicing protocols for product use.
Details FCC and European Community compliance statements for the device.
Comprehensive safety advice on cleaning, accessories, water, and damage.
Lists the specific camera models covered by this hardware manual.
Lists all items included in the camera package.
Identifies key physical components like memory slot, Ethernet port, and reset button.
Guides through the physical mounting and adjustment of the camera.
Details connecting and waterproofing the camera's network cable.
Instructions for connecting the camera to a network via PoE.
Guides on accessing the camera's live view after connection.
How to adjust camera orientation for horizontal or vertical viewing formats.
Procedures for installing and removing the optional memory card.
Steps to reset the camera to its factory default settings.
Instructions on how to attach the RJ-45 connector to the Ethernet cable.
Covers configuring IP addresses via DHCP or manually for network access.
Using IP Utility to discover and manage cameras on the network.
Guide to accessing the camera's web interface using a browser.
General| Model | E38 |
|---|---|
| Form Factor | Bullet |
| Aperture | F2.0 |
| Day/Night | Yes |
| Connectivity | Ethernet |
| Vandal Resistance | IK10 |
| Device Type | IP Camera |
| Environment | Outdoor |
| Sensor Type | CMOS |
| Lens Type | Fixed |
| Field of View | H: 102.7°, V: 55.1°, D: 121.4° |
| Viewing Angle | H: 102.7°, V: 55.1°, D: 121.4° |
| Minimum Illumination | 0.1 Lux |
| WDR | WDR |
| Video Compression | H.264 |
| Frame Rate | 30fps |
| Local Storage | MicroSD |
| Network Interface | 10/100 Mbps |
| Power Supply | 12V DC |
| Operating Temperature | -30°C ~ 60°C (-22°F ~ 140°F) |
To Next Page
