ACTi E38 - Physical Description

www.acti.com
Hardware Manual
8
Physical Description
Item
Description
1
Memory Card Slot
Insert a memory card into this slot for local recording purposes.
See How to Install / Remove the Memory Card (Optional) on
page 16 for more information.
NOTE: Supports microSDHC only.
2
Ethernet Port
Connects to a network using a standard Ethernet cable.
3
Reset Button
Restores the factory default settings of the camera. Resetting the
camera must be done while the power is on. See How to Reset
the Camera on page 19 for more information.