Need help?Do you have a question about the ACTi E37 and is the answer not in the manual?
Step-by-step guide to installing the camera bracket.
Steps for mounting the camera onto the installed bracket.
Procedures for weatherproofing cable connections for outdoor use.
Steps for connecting the network and power cables to the camera.
Instructions for resetting the camera to its factory default settings.
Overview of IP address setup approaches for camera network access.
Steps to manually set PC and camera IP addresses for network access.
General| Model | E37 |
|---|---|
| Product Type | Network Camera |
| Environment | Indoor |
| Sensor Type | CMOS |
| Day/Night | Yes |
| IR Cut Filter | Yes |
| IR LED | No |
| Wide Dynamic Range | Yes |
| Video Compression | H.264, MJPEG |
| Frame Rate | 30 fps at 1920 x 1080 |
| Multiple Streaming | Yes |
| Network Interface | RJ-45 |
| Wireless | No |
| Vandal Proof | No |
| Weather Proof | No |
| Audio Compression | G.711 |
| Local Storage | MicroSD/SDHC |
| Ethernet | 10/100 Mbps |
| Power Source | PoE, DC 12V |
| Power Supply | PoE Class 3 (IEEE 802.3af) / DC 12V |
To Next Page
