ACTi R12CP-30 - Introduction; Package Contents; Additional Requirement for Installation

www.acti.com
Installation Guide
6
Introduction
Package Contents
1. Reader and Controller Unit
2. Ethernet Terminal Cable
3. Terminal Cables (x 5)
4. Terminal block strip (x 3)
5. Screw Pack
6. Waterproof Rubber Strip
NOTE: Actual items may slightly vary.
Additional Requirement for Installation
The following items are not included in the package. Installers must prepare these items to do the
installation.
1. DC 10~24V Power adapter
2. Ethernet cable
3. Allen wrench