75
Setting up Static IP
on a Computer
To communicate with the Modem from a computer on the network (to use the
Modem’s GUI, for example), the user may have to switch the IP address settings
from DHCP-enabled to static IP on the computer, so that the computer and the
Modem are on the same subnet.
To set up static IP on a computer, select the operating system and follow the
instructions provided in this chapter.
☞
Note: The following insturctions are based on the Modem’s
factory default IP address. If the Modem’s IP address has been
changed, enter the new IP address when instructed to enter an
IP address.
Windows 2000
1. From the desktop, click on the Start button in the lower left corner.
2. From the menu that appears, select Settings.
B
To Next Page
Loading...
Need help?
General
