ActionTec GT784WN - Mac OS X Computer Setup; Mac OS 8;9 Computer Setup

1-888-850-5915
Technical Support
8
128429/7-12/7670
Actiontec GT784WN Router
Setup and User Guide
Mac OS X:
1. Select the Apple menu, then select System Preferences.
2. Select Network.
3. On the Show dropdown box, select Built-In Ethernet.
4. On the TCP/IP tab, make certain the Configure IPv4 dropdown box is set to Manually.
5. Using the information from your Customer Information Sheet, set the following:
• IP Address: One of the LAN Usable IPs
• Subnet Mask: LAN Subnet Mask
• Default Gateway: LAN Default Gateway
• DNS Servers: DNS Primary & Secondary Servers
6. When asked if you want to apply configuration changes, select Apply.
Mac OS 8/9:
1. Select the Apple menu, then select Control Panels, and select TCP/IP.
2. On the Connect via dropdown box, select Ethernet.
3. On the Configure dropdown box, select Manually.
4. Using the information from your Customer Information Sheet, set the following:
• IP Address: Any one of the LAN Usable IPs
• Subnet Mask: LAN Subnet Mask
• Router Address: LAN Default Gateway.
• Name Server Addr.: DNS Primary & Secondary Servers
5. Click Close.
6. When asked if you want to save changes to the configuration, select Save.
After configuring your computer, reboot your router by turning it off and then back on. Finally, open a browser
and verify that you can access the Internet. If you cannot, please contact our Internet Technical Support team.