Need help?Do you have a question about the ActionTec T3200BV and is the answer not in the manual?
General| Device Type | DSL Modem Router |
|---|---|
| Wireless Standard | 802.11ac |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Ethernet Ports | 4 |
| WAN Ports | 1 |
| USB Ports | 1 |
| Firewall | Yes |
| QoS | Yes |
| Parental Controls | Yes |
| Maximum Wireless Speed | 300 Mbps |
| Security | WPA/WPA2 |
| DSL Standards | VDSL2, ADSL2+, ADSL2, ADSL |
Lists items included in the product box.
Specifies hardware and software needed to use the Gateway.
Highlights key capabilities and technologies of the Gateway.
Introduces the Gateway's physical components and indicators.
Explains the function and usage of the Gateway's DSL ports.
Illustrates various connection methods for setting up the Gateway.
Guides on establishing a connection between a computer and the Gateway.
Provides instructions on how to navigate to the Gateway's main interface.
Describes the navigation icons and status information on the Home screen.
Guides on how to reach the various status monitoring screens.
Details how to view current network connection parameters.
Shows DSL connection parameters for Line 1 and Line 2 ports.
Displays WAN (wide area network) configuration and status details.
Lists the current routing entries for the network.
Displays the current status and configuration of the Gateway's firewall.
Shows the Network Address Translation (NAT) table entries.
Provides an overview of the Gateway's wireless network parameters.
Offers detailed statistics for the wireless network performance.
Displays information about wireless clients connected to the Gateway.
Shows statistics related to the Gateway's modem operational status.
Details the status and parameters of the Gateway's local area network.
Displays the Gateway's Address Resolution Protocol (ARP) table.
Allows scanning for and displaying connected network devices.
Presents statistics for the Gateway's various network interfaces.
Displays statistics related to multicast traffic on the Gateway.
Provides access to the Gateway's system event log.
Instructions on how to navigate to the wireless configuration screens.
Configures fundamental wireless network parameters like SSID and security.
Configures advanced wireless network features and capabilities.
Guides on setting up Wi-Fi Protected Setup for easy device connection.
Manages wireless access by controlling MAC addresses.
Configures automatic connection of devices to optimal Wi-Fi bands.
Instructions on how to navigate to the firewall configuration screens.
Configures basic firewall security levels and WAN ping blocking.
Sets up firewall rules and security levels for IPv6 traffic.
Configures rules to forward specific ports to LAN devices.
Allows forwarding of specific applications by port.
Exposes a LAN device to the internet with full access.
Configures DMZ hosting for IPv6 addresses.
Enables or disables Universal Plug and Play (UPnP) functionality.
Guides on how to navigate to the advanced configuration screens.
Blocks specific internet services for devices on the network.
Blocks access to specific websites for devices on the network.
Schedules internet access times for specific devices.
Manages internet access and website restrictions for devices.
Configures the WAN interface's IP address and protocol settings.
Configures IPv6 connection parameters for the WAN interface.
Configures the Gateway's LAN IP address and DHCP server settings.
Configures IPv6 addressing and connection settings for the LAN.
Assigns permanent IP addresses to specific devices via MAC address.
Associates the WAN IP address with a dynamic hostname.
Creates static hostnames for specific IP addresses.
Configures port bridging using LAN Port 1.
Configures basic privacy settings for the MoCA LAN.
Configures advanced settings for the MoCA LAN, including channel and MAC.
Enables and configures remote access to the Gateway's graphical interface.
Enables and configures remote access to the Gateway via Telnet.
Configures dynamic routing protocols (RIP) for network setup.
Configures static routes for network traffic management.
Allows changing the administrator password for security.
Configures Network Address Translation (NAT) settings.
Displays information about connected storage devices.
Sets up a Samba environment for file sharing.
Restarts the Gateway to apply changes or resolve issues.
Resets Gateway settings to factory defaults or specific configurations.
Performs a speed test on the Gateway's Internet connection.
Tests Internet connectivity and latency to a specific host.
Conducts network performance testing using the iperf tool.
Performs an IPv6 ping test to check connectivity.
Traces the route taken by network packets to a destination.
Traces the route of IPv6 packets across a network.
Sets the Gateway's time zone for accurate logging and scheduling.
Manages Gateway configuration files by downloading or uploading.
Displays a log of firmware upgrade events applied to the Gateway.
Configures Application Layer Gateway (ALG) settings for specific protocols.
Configures the Digital Living Network Alliance (DLNA) server settings.
Loads a customer-defined configuration file onto the Gateway.
Configures the Gateway to act as a print server for network printers.
Performs diagnostic tests on the xDSL connection.
Provides general information about the Gateway, including model and standards.
Lists the technical standards supported by the Gateway.
Details the LAN and WAN protocols used by the Gateway.
Specifies the WAN interface type.
Describes the LAN port configuration and speed.
Lists the speed capabilities for LAN Ethernet and wireless connections.
Specifies the types of Ethernet cables supported.
Details the indoor and outdoor range of the wireless signal.
Describes the network topology used by the Gateway.
Explains the meaning of the Gateway's LED indicators.
Provides specifications for the included power adapter.
Specifies the power requirements for the Gateway.
Lists the regulatory certifications obtained by the product.
Specifies the recommended operating temperature range.
Specifies the recommended storage temperature range.
Specifies the recommended operating humidity range.
Specifies the recommended storage humidity range.
Details the product's limited hardware warranty and software update period.
Explains how local laws may affect warranty rights and disclaimers.
Provides essential safety precautions for using the Gateway.
Instructions for grounding coaxial cable screen shields.
Explains compliance with FCC Class B digital device limits.
Warns against unauthorized modifications to the device.
States compliance with FCC Part 15 rules.
Provides important information regarding Wi-Fi operation and FCC compliance.
Details FCC Part 68 compliance and telephone connection information.
Provides information regarding telephone company notifications and service.
Lists company contact details for technical assistance.
Recommends installing surge protection for electrical safety.
To Next Page
