16
Updating the
ScreenBeam
Firmware
This chapter details the procedures to upgrade the ScreenBeam firmware. The first
section details updating the ScreenBeam firmware if you are using ScreenBeam
with a Windows 7/8 computer; the second explains how to update the firmware on
the ScreenBeam Display Adapter if you are using Miracast or WiDi.
Updating Firmware on Windows 7/8 Devices
This section explains how to update your ScreenBeam firmware if you are using
both the ScreenBeam Display Adapter and Transmitter with a Windows 7/8
computer.
1. Make sure that ScreenBeam is disconnected. Then, right-click on a profile
from the main ScreenBeam window and select “Check for updates…”
4
To Next Page
Loading...