4
ScreenBeam Wireless Display Adapter Kit
HDMI Port
The HDMI port is used to connect an HDMI cable from the HDTV monitor
to the Display Adapter.
Power Port
The Power port is used to connect the Display Adapter’s Power cord.
USB Port
The USB port is used for software upgrades via a USB flash drive.
ScreenBeam Transmitter
The Transmitter has a single USB connection, used to connect it to a USB
port on a Windows7/8 computer that is not running Miracast or WiDi. To use
ScreenBeam in this manner, you must install the ScreenBeam software on the
computer (see chapter 2 of this manual).
To Next Page
Loading...