7
USB
This LED brights green when there is an active device connected to the USB
port.
Wi-Fi 2.4G
This LED brights green when the Gateway’s radio is operating in the 2.4GHz
band.
Wi-Fi 5G
This LED brights green when the Gateway’s radio is operating in the 5GHz
band.
WPS Button
The WPS button is used when connecting a wireless device to the Gateway’s
wireless network using WPS.
Rear Panel
The rear panel of the Gateway features 8 ports, and a Reset button.
Power Port
T
he Power port is used to connect the Power cord (Model No.
, mad
e by Actiontec) to the Gateway.
Reset Button
Depressing the Reset button for 10 seconds will restore the Gateway’s
factory default settings. The reset process will start after releasing the
button.
Windstream T3280V Gateway
CDS036-W120U
To Next Page
Loading...
Need help?
General
