ActionTec WCB3000N User Manual

Wireless Network Extender
Change Password
e “Change Password” screen allows the user to change the password
that allows access to the GUI. To change, enter the current password,
enter and re-enter the new password, then click Apply. Be sure to write
the password down and keep it somewhere safe, as it will be needed to
access the Extender’s GUI.
!
Factory Default
e “Factory Default” advanced setup screen allows the Extender’s
factory default settings to be reapplied, erasing all current settings. Click
Restore Default Settings to restore the Extender to it's original factory
settings.
!
!
16

ActionTec WCB3000N Specifications

General

Brand	ActionTec
Model	WCB3000N
Category	Extender
Language	English