Advanced Setup
Selecting “Advanced Setup” from any of the Extender’s GUI screens
generates the “Management” screen, along with other advanced settings
accessed through the menu on the le side of the screen. ese settings
congure various administrative aspects of the Extender and its GUI.
ey should be adjusted by experienced users only.
If the box next to Auto Congure is checked, then the Extender will
always reect and import SSID and security settings from the gateway. If
you wish to congure the Extender manually with different settings than
your gateway/modem, then uncheck this box.
Management
e “Management” advanced setup screen (above) allows the Extender’s
IP address settings to be modied. Only experienced users should change
these settings.
!