ActiveProducts 1450 - Shutting Down and Cleaning Up Procedures; Taking a Break from Operation

Unplug the power cord from the outlet.
Step
3
Turn pressure washer to “OFF” (O) position.
Step
2
Engage
gun safety lock.
Step
1
If
taking a break of five minutes or more:
Step
4
Disconnect the garden hose from the water inlet on
the unit.
Step
5
Disconnect the high-pressure hose from the high-
pressure outlet and engage the gun safety lock.
Step
1
Turn the switch to “OFF” (0) position and unplug cord
from outlet.
Step
2
Turn off the water supply.
Step
3
Turn off water supply and squeeze trigger
to
depressurize the unit. Failure to do so
could
result in personal injury due to dis-
charge
of high-pressure water.
Warning
TAKING A BREAK
SHUTTING DOWN AND CLEANING UP
10
Press trigger to release water pressure and remove
excess water from the pressure washer.