EasyManua.ls Logo

activTek INDUCT 2000 User Manual

activTek INDUCT 2000
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
65-00117-004
ID_2000_OM_65-00117-004_0707
310 T. Elmer Cox Drive
Greeneville, TN 37743
This equipment has been tested and found to
comply with the limits for Industrial, Scientific,
and Medical Equipment (ISM), pursuant to
Part 18 of the FCC Rules. These limits are
designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses,
and can radiate radio frequency energy, and if
not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio
or television, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
Consult the Distributor or an experienced
radio/TV technician for help.
FCC DECLARATION OF CONFORMITY
Name: activTek Environmental
Model: activTek INDUCT 2000
Manufacturer: activTek Environmental
This device complies with Part 18 of the
FCC Rules.
RESPONSIBLE PARTY
activTek Environmental
310 T. Elmer Cox Dr.
Greeneville, TN 37743
Signature:___________________________
Printed Name: R. Paul Beam
Title: Engineering Manager
Date: 7/9/04
activTek INDUCT 2000
, ActivePure
, are Trademarked by activTek
Environmental.
www.ecoquest.company
(888)664-1812
Ph: (888)664-1812

Other manuals for activTek INDUCT 2000

Question and Answer IconNeed help?

Do you have a question about the activTek INDUCT 2000 and is the answer not in the manual?

activTek INDUCT 2000 Specifications

General IconGeneral
BrandactivTek
ModelINDUCT 2000
CategoryAir Cleaner
LanguageEnglish

Summary

Installation Hardware

Specifications

Safety Information

UV Light Safety Warning

Disconnect unit from power supply before servicing to avoid severe eye damage.

Installation Contractor Requirement

Unit must be installed by a licensed HVAC contractor to avoid voiding the warranty.

Ballast Voltage Setting Warning

Check ballast setting for 120V or 220V applications before installation.

Recommended Installation Tools

Installation Requirements

Wiring and Voltage Specifications

Instructions for wiring colors and voltage settings based on unit type.

Metal Ductwork Installation

Fiberglass Ductwork Installation

Maintenance and UV Lamp Indicator

Warranty Information

Changing the ActivePure Cell

Related product manuals