EasyManua.ls Logo

ACTON BLINK BOARD - User Manual

ACTON BLINK BOARD
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ACTON
BLINK® BOARD
Belt Drive
OWNER’S MANUAL
CONTENTS
I. SAFETY WARNINGS
A. General Disclaimer
B. Age, Weight & Health
C. Conditions for safe riding
D. Battery Handling & Disposal
E. Radio Interference Precautions
II. PRODUCT INFORMATION
A. Technical Specifications
B. Parts List
C. Available Accessories/Service Components
III. USING BLINK®
A. Riding & Beginner Tips
B. Low Battery Warning/ Charging
C. Sleep mode
IV. CARE & MAINTENANCE
A. Belts, Bearings & Wheels
B. Other maintenance
V. TROUBLESHOOTING
VI. WARRANTY
VII. COPYRIGHT
WARNING!
RISK OF DEATH OR SERIOUS INJURY MAY OCCUR
WEAR HELMET AND PROTECTIVE GEAR AT ALL TIMES
Improper use of ACTON Blink® can lead to serious injury or even death due to loss
of control, falls and collisions. Please read and follow all instructions in this Owners
Manual prior to using Blink®.
DO NOT RETURN TO STORE! PLEASE CONTACT US DIRECTLY FOR
TECHNICAL SUPPORT BY SENDING AN EMAIL TO:
SUPPORT@ACTONGLOBAL.COM
NOTE: Manual illustrations are for demonstration purposes only. Illustrations may
not reflect exact appearance of actual product. Specifications are subject to
change without notice.
1

Questions and Answers

  • J
    Jacob HillJul 27, 2025
    What to do if my ACTON BLINK BOARD Accessories won’t turn on?
    • C
      cnormanJul 27, 2025
      If your ACTON Accessories won’t turn on, it might be due to a low battery. Charge the battery for at least 1 hour to resolve this issue.
  • K
    Kathleen StevensonAug 2, 2025
    What to do if my ACTON Accessories won’t charge?
    • K
      kevinmillerAug 2, 2025
      If your ACTON Accessories won’t charge, first ensure that you’re using the correct charger and that it is properly connected to an outlet. If the battery has not been charged for more than one month, it may require an extra hour before it takes a charge.
  • P
    Patrick StewartAug 8, 2025
    What to do if my ACTON Accessories won’t go?
    • J
      jamie70Aug 8, 2025
      If your ACTON Accessories won’t go, it could be due to a disconnected Bluetooth or the skateboard/remote being in sleep mode. To fix this, try restarting the remote and skateboard. If that doesn't work, shut down both the skateboard and remote for 10 seconds, then turn them on again.
  • S
    Sarah CarrAug 14, 2025
    Why is the range too low on my ACTON BLINK BOARD Accessories?
    • J
      jordangloriaAug 15, 2025
      If the range of your ACTON Accessories is too low, it could be because you exceed the weight limit (Blink is designed for a person who weighs up to 220lbs) or the battery health has dropped. If the battery health has dropped, you may need to replace the battery pack.
  • J
    Jeffery WhitakerAug 20, 2025
    How to fix vibration and noises in ACTON Accessories?
    • M
      michael47Aug 20, 2025
      Vibration and noises in your ACTON Accessories can be due to a loose belt or worn-down wheel/bearing. To address this, change the belt or change the wheel/bearing.

Summary

Safety Warnings

General Disclaimer

Riding ACTON Blink® can be a dangerous activity. Certain conditions may cause equipment failure. User assumes risk.

Age, Weight, and Health Requirements

Recommended rider age is 16+. Do not exceed the weight limit of 220 lbs. Keep away from small children.

Safe Riding Conditions

Obey local laws, ride defensively, watch for obstacles. Wear protective gear. Avoid water and riding at night.

Battery Handling and Disposal

Charge battery before first use. Use optimal temperature conditions. Never store or use battery in freezing temperatures.

Product Information

Technical Specifications

Details on Deck, Wheels, Weight, Max Speed, Range, Max Incline Rate, Rider Weight, Power, Battery Capacity, Charging Time, Remote Controller.

Part List

Lists included items: electrical skateboard, remote controller, charger, tool, and strap.

Available Accessories and Service Components

Lists optional accessories and service parts such as belts, wheel sets, bearings, and helmet.

Using Blink

Riding and Beginner Tips

Quick start guide for experienced skateboarders. Remote controls acceleration and speed. Three modes: BEGINNER, NORMAL, PRO.

Low Battery Warning and Charging

Skateboard and remote beep when battery is low. Always charge the battery after it drains for longevity.

Sleep Mode Functionality

Energy saving mode activates after 5 minutes of idle time. Turn off board and remote after use to prevent battery depletion.

Care and Maintenance

Belts, Bearings, and Wheels Maintenance

Step-by-step guide for changing the driving wheel and belt. Mentions keeping track of spacers and not overtightening axle nuts.

Other Maintenance Procedures

Instructions for cleaning the board with a soft cloth, storing it in a cool environment, and recharging the battery monthly.

Troubleshooting Common Issues

Warranty and Disclaimer Information

Return Policy Details

Details on returning unused products within 7 days with a full refund, requiring original packaging and proof of purchase.

Product Warranty Coverage

Non-transferable limited coverage for 6-months. Includes 90-day/200-mile manufacturer warranty for defects and motor warranty.

Copyright Information

ACTON BLINK BOARD Specifications

General IconGeneral
CategoryElectric Skateboard
Weight7.7 lbs (3.5 kg)
Range7 miles (11 km)
BatteryLithium-ion
Charge Time1.5 hours
Deck MaterialCanadian Maple Wood
TypeElectric Skateboard
Max Load220 lbs (100 kg)