EasyManua.ls Logo

ActronAir CRV180T User Manual

ActronAir CRV180T
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ADVANCE
Split Ducted Unit
Installation and Commissioning Guide - Outdoor
Model Numbers
CRV140S
CRV160S
CRV180S
CRV160T
CRV180T
CRV210T
CRV240T
IMPORTANT NOTE:
Please read this manual carefully before installing or operating your air conditioning unit.
That’s better. That’s Actron.
Question and Answer IconNeed help?

Do you have a question about the ActronAir CRV180T and is the answer not in the manual?

ActronAir CRV180T Specifications

General IconGeneral
BrandActronAir
ModelCRV180T
CategoryAir Handlers
LanguageEnglish

Summary

Introduction to ActronAir Split Ducted Units

General Information on Advance Series Units

Safety Instructions for Installation and Service

General Safety Precautions

Covers installer qualifications, adherence to regulations, and proper PPE usage.

Hazardous Voltage and Electrocution Risk

Details electrocution risk and mandatory LOCK-OUT/TAG-OUT procedures.

Capacitor Discharge Warning

Advises on residual voltage in EC motors and drives after power isolation.

Rotating Fan Hazards and Precautions

Warns about fan hazards and necessary safety measures during servicing.

Installation Information and Preparation

Refrigerant Recovery and Recycling Procedures

Explains legal requirements and procedures for refrigerant handling and recycling.

Unit Dimensions and Clearances

CRV140S Dimensions and Clearances

Provides physical dimensions and required clearances for the CRV140S model.

CRV160/180 Series Dimensions

Details dimensions and clearances for CRV160S/T and CRV180S/T models.

CRV210/240T Dimensions and Clearances

Provides physical dimensions and required clearances for CRV210T/CRV240T models.

Unit Lifting Procedures

Crane Lifting Method Guidelines

Details the recommended method and equipment for high-rise lifting.

Forklift Lifting Method and Safety

Describes safe procedures for lifting with a forklift, including precautions.

Field Pipe Connection and Brazing

Piping and Brazing Procedures

Details techniques, precautions, and cleanliness required for brazing refrigerant pipes.

Pressure Testing and Evacuation

Pressure Testing Procedure

Details the staged pressurization process for leak detection.

Triple Evacuation Procedure

Outlines the multi-stage evacuation steps to remove moisture and non-condensables.

Refrigeration Specifications

Electrical Installation Guidelines

General Electrical Safety and Precautions

Covers installer qualifications, LOTO procedures, and electrical safety.

Supply and Power Requirements

Details power compatibility, protection devices, and earthing requirements.

Electrical Connection for Split Units

Circuit Breaker and Cable Size Requirements

Electrical Sizing Requirements Table

Table specifying circuit breaker size and cable size requirements per model.

Recommended Wiring Configuration

Wiring Connections Details

Demand Response Management

System Configuration and Control Options

Third Party Control Inputs

0-10V Input for Compressor and Indoor Fan

Details analog input for controlling fan and compressor via 0-10V signals.

External Control of Fan and Compressor

Fan and System Status Outputs

Indoor Fan Commissioning and Performance

EVV140S/EFV140S Fan Settings & Curves

Details fan speed settings, PWM limits, and application curves for EVV140S/EFV140S.

EVV160S/EFV160S Fan Settings & Curves

Details fan speed settings, PWM limits, and application curves for EVV160S/EFV160S.

EVV180S/EFV180S Fan Settings & Curves

Details fan speed settings, PWM limits, and application curves for EVV180S/EFV180S.

EVV210S/EFV210S Fan Settings & Curves

Details fan speed settings, PWM limits, and application curves for EVV210S/EFV210S.

EVV240S/EFV240S Fan Settings & Curves

Details fan speed settings, PWM limits, and application curves for EVV240S/EFV240S.

Refrigerant Charging Procedures

Subcooling and Superheat Charging Method

Explains how to charge refrigerant using subcooling and superheat measurements.

Checking for Subcooling

Details the process and formula for checking and adjusting subcooling.

Checking for Superheat

Details the process and formula for checking and adjusting superheat.

Maintenance Procedures and Schedules

Maintenance Frequency Checklist

Related product manuals