15
POWER SUPPLY FOR LIP OR CHAIN MOTOR
The Flex1 ACDC consists of an electrical high performance
230VAC / 24VDC Switch Mode Power Supply.
It is possible to mount LIP5, LIP6 or LIP7 from the traditional
Actulux Opening System enabling them to be supplied by
230V.
As additional it can also be used as a 230VAC supply for ex.
24VDC Chain Drives HCM / HCV or Spindle Drives.
In both options it is possible to congure the Flex1 ACDC with
a RF-receiver PCB #111894 to make remote control possible
for comfort ventilation use and for the Actulux Weather
Sensors.
www.actulux.com
Denmark
DK 9560 Hadsund
Haandvaerkervej 2
Actulux A/S Phone int.: +45 98 57 40 90
Fax int.: +45 96 15 28 00
e-mail: info@actulux.com
Power to Actulux LIP module
2
B
l
u
e
To be cut if DCR is going to be used
Sync 1
Sync 2
HTRW
Jumper
HCM
Grey
White
Blue
Red
D
O
W
N
if mounted.
1
Neutral
Earth
Phase
U
P
ON
UP
318001504230
LipX AC R. 1
1
2
HCV
HCM
without LIP
B
r
o
w
n
HTRW
HCV
Comfort Switch
OPUS part no. 111753
Actulux A/S
Denmark
DK 9560 Hadsund
Haandvaerkervej 2
www.actulux.com
Phone int.: +45 98 57 40 90
Fax int.: +45 96 15 28 00
e-mail: info@actulux.com
ON
1
318001504230
N NEUTRAL
2
HCV
Sync 1
UP
LipX AC R. 1
B
r
o
w
n
To be cut if DCR is going to be used
Mount 111894
Jumper
B
l
u
e
Blue
Sync 2
1
2
Red
Neutral
Earth
PD DOWN
HCM
White
PD
HCM
without LIP
Grey
Phase
if mounted.
PE EARTH
HTRW
Power to Actulux LIP module
HCV
HTRW
PU UP
Flex1 ACDC - AC controlled Flex1 ACDC - RF controlled
Flex1 ACDC as supply for motors with own
overload protector. (Chain & Rack Drives)
Box size (LxWxH): 180 x 110 x 63 mm
Flex1 ACDC as supply for build in
overload protector ex. LIP7 OC #121308
Box size (LxWxH): 180 x 110 x 63 mm
FEATURES
Power supply: 230VAC - max. 1.5A
Output: 24VDC
Can be used with all kinds of 24VDC motors with own overload protection
Max. operation time 120 sec. Duty cycle 10% 2 min. / 18 min.
IP class: IP66
Operating temperature: -15°C - +40°C
Product no.: #121370 3A / 65W
Product no.: #121380 4A / 80W
Product no.: #121390 6A / 150W
Product no.: #121360 8A / 200W
Option: RF control by use of #111894
Flex1 ACDC
AC Power Supply for LIP or Chain Motor
To Next Page
Loading...