17
“Add on” Relay PCB
heat control, indication on BMS controls, intruder alarms
PCB FOR INDICATION OF WINDOW POSITION
This “Add on“ relay PCB can be used where indication
about opened windows on the comfort or alarm function
is needed.
The “Add on“ relay PCB is going to be connected through
a at cable to the SV control unit and the indication LED
display in the front.
FEATURES
Supply: 24V DC
Contact function: 2 pcs. NO/NC contacts
Load on contacts: 230V / 2A
LED1 / LED2: Indication about open
Can also be used for indication of active weather sensor (requires special software in control panel)
Part no.: #111690 (SV Control Panels)
Connection
To Next Page