ACU-RITE SENC 50 - Page 3

3
Contents
Digital readouts
Selection guide
4
Functions Installation guide (DRO203, DRO300)
6
Probing functions for presets (DRO300)
6
Tool compensations (DRO203, DRO300)
6
Distance-to-go display (DRO100, DRO203, DRO300)
7
Dynamic zoom (DRO203, DRO300)
7
Hole patterns (DRO203, DRO300)
8
Programming of machining steps (DRO300)
8
Assistance for working with lathes (DRO203, DRO300, DRO303)
9
Specications DRO100 – Simple digital readout for one, two, or three axes
10
DRO203 – Versatile digital readout for up to three axes
12
DRO300 – Programmable digital readout for three or four axes
14
Accessories Edge nder
16
Mounting components
17
IOB 610 external input/output unit for DRO300
19
Interfaces
21
Linear encoders
Linear encoders – For manually-operated machine tools
22
Mounting instructions
23
Specications SENC 50 – Compact linear encoder for limited installation space
24
SENC 150 – Standard linear encoder
26
Interfaces
Incremental signals «
TTL
28
Electrical connection Cable
29
General electrical information
30