4
Selection guide
Number of axes Reference points/
Tool data
Functions Encoder
inputs
Switching inputs/
outputs
Data
interface
Models Page
DRO100
Digital readout for general applications
with up to three axes
• 7” TFT color display
• Splash-proof membrane keyboard
1, 2 or 3 1 datum General:
• Absolute/incremental display
• mm/inch switching
Turning:
• Radius/diameter display
« TTL – USB
Type C
DRO101,
DRO102,
DRO103
10
DRO203
Digital readout for milling, drilling and
boring machines, as well as for lathes with
three axes
• 7” TFT color display
• Splash-proof full-travel keyboard
Up to 3 10 datums
16 tools
General:
• Distance-to-go display with graphic positioning
aid
Milling and drilling:
• Probing function using tool
• Tool radius compensation
• Hole patterns (circular and linear patterns)
Turning:
• Radius/diameter display
• Separate/sum display
« TTL – USB
Type C
DRO203
12
DRO300
Digital readout for milling, drilling and
boring machines, as well as for lathes with
up to three axes
• 7” TFT color display
• Program memory
• Splash-proof full-travel keyboard
• Switching inputs/outputs (via IOB 610)
Up to 4 10 datums
99 tools
General:
• Distance-to-go display with graphic positioning
aid
• Program memory for up to 8 programs with 250
steps each
Milling and drilling:
• Probing functions for KT edge nder
• Tool radius compensation
• Hole patterns (circular and linear patterns)
Turning:
• Taper calculator
• Radius/diameter display
• Separate/sum display
« TTL For KT edge nder;
additional ones via
IOB 610
USB
Type C
DRO303,
DRO304
14
To Next Page
Loading...