To add oil, unscrew and remove the
engine oil fill cap on top of the valve
cover. Pour in the oil, and install the
engine oil fill cap. Tighten it securely.
Wait a few minutes and recheck the
oil level. Do not fill above the upper
mark; you could damage the engine.
Make sure the API Certification Seal
says ‘‘For Gasoline Engines.’’Oil is a major contributor to your
engine’s performance and longevity.
Always use a premium-grade 5W-20
detergent oil displaying the API
Certification Seal. This seal indicates
the oil is energy conserving, and that
it meets the American Petroleum
Institute’s latest requirements.
Genuine Honda Motor Oil is the
preferred 5W-20 lubricant for your
vehicle. It is highly recommended
that you use genuine Honda Motor
Oil in your vehicle for optimum
engine protection.
CONTINUED
Recommended OilAdding Oil
Engine Oil
Maintenance
261
EENNGGIINNEE OOIILL FFIILLLL CCAAPP
AAPPII CCEERRTTIIFFIICCAATTIIOONN SSEEAALL
01/09/07 12:37:03 31S3V610_266
To Next Page
Loading...
