Acura 2002 MDX User Manual

Turn the ignition switch ON (II).
You cannot add a new driving
position in the memory unless the
ignition switch is ON (II). You can
recall a memorized position with
the ignition switch in any position.
Seat and outside mirror positions, for
two different drivers or driving
conditions,canbestoredinseparate
memories. You select a memorized
position by pushing the appropriate
button or using the appropriate
remote transmitter (Memory 1 or
Memory 2).
Store a driving position as explained
in this section only when the vehicle
is parked.
Adjust the seat to a comfortable
position (see page ).
Adjust the outside mirrors for best
visibility (see page ).
Press and release the MEMO
buttononthecontrolpanel.You
will hear a beep. Immediately
press and hold one of the memory
buttons (1 or 2) until you hear two
beeps. The indicator light in the
memory button will come on. The
current positions of the driver’s
seat and outside mirrors are now
stored.
Your Acura has a memory feature
for the driver’s seat and outside
mirror positions.
3.
1.
2.
90
105
CONTINUED
Touring Model Storing a Driving Position in Memory
Driving Position Memory System
Instruments and Controls
107
MMEEMMOO BBUUTTTTOONN
01/09/07 12:12:42 31S3V610_112

Acura 2002 MDX Specifications

General

Brand	Acura
Model	2002 MDX
Category	Automobile
Language	English