−
Check the condition of your vehicle’s
battery monthly. You should check
the color of the test indicator window,
and for corrosion on the terminals.
If the terminals are severely cor-
roded, clean them with baking soda
and water. Then use a wrench to
loosen and remove the cables from
the terminals. Always disconnect the
negative ( ) cable first and recon-
nect it last. Clean the battery termi-
nals with a terminal cleaning tool or
wire brush. Reconnect and tighten
the cables, then coat the terminals
with grease.
Check the battery condition by
looking at the test indicator window
on the battery.
The label on the battery explains the
test indicator’s colors.
Check the battery terminals for
corrosion (a white or yellowish
powder). To remove it, cover the
terminals with a solution of baking
soda and water. It will bubble up and
turn brown. When this stops, wash it
off with plain water. Dry off the
battery with a cloth or paper towel.
Coat the terminals with grease to
help prevent future corrosion.
Battery posts,
terminals and related accessories
contain lead and lead compounds.
WARNING:
Wash hands after handling.
Battery
Maintenance
280
TTEESSTT IINNDDIICCAATTOORR WWIINNDDOOWW
01/09/07 12:40:00 31S3V610_285
To Next Page
Loading...
Need help?
General
