＋
−
＋
−
Push the wire connector onto the
ignition coil. Make sure it locks in
place.
Install the ignition coil. Reinstall
the hexagon socket head cap bolt.
Repeat this procedure for the
other five spark plugs.
Reinstall the cover on the front
cylinder bank while putting its
mounting clip in the hole on the
passenger’s side. Secure the cover
by turning the heads of the two
holding clips one-quarter turn
clockwise with a flat-tipped
screwdriver.
Spark Plug Gap:
Spark Plug Gap:
NGK:
DENSO:
8.
11.
10.
9.
NGK:
DENSO:
Specifications:
Spark Plugs
Maintenance
Type S
Premium model
242
0.04 in (1.1 mm)
PKJ20CR-M11
PZFR6E-11
0.04 in (1.1 mm)
PKJ16CR-L11
PZFR5F-11
0
0.1 mm
0
0.1 mm
Tighten the spark plugs caref ully. A
spark plug that is too loose can
overheat and damage the engine.
Overtightening can cause damage to
the threads in the cylinder head.
00/12/25 14:33:22 31S0K630_245
To Next Page
Loading...
