Adjust the outside mirrors with the
adjustment switch on the left side of
the dashboard:
Turn the ignition switch ON (II).
Move the selector switch to L
(driver’s side) or R (passenger’s
side).
Push the appropriate edge of the
adjustment switch to move the
mirrorright,left,up,ordown.
When you finish, move the
selector switch to the center (off)
position. This turns off the
adjustment switch so you can’t
move a mirror out of position by
accidentally bumping the switch.
With the selector switch in the
center (off) position, the passenger’s
side mirror will pivot downward
slightly when you shift the
transmission into reverse. This gives
you a better view of the side of the
vehicle while parallel parking. The
mirror returns to its original position
when you take the transmission out
of reverse.
1.
2.
3.
4.
Touring Model
Adjusting the Power Mirrors
Mirrors
Instruments and Controls
116
SELECTOR SWITCH ADJUSTMENT SWITCH
To Next Page
Loading...
Need help?
General
