Placethejackunderthejacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
restinginthejacknotch.
Unscrew the wing bolt and take
the spare tire out of the trunk.
Loosen each wheel nut 1/2 turn
with the wheel wrench.
Open the trunk. Raise the trunk
floor by lifting up on the back edge.
Take the tool tray out of the trunk,
and remove the tools and the jack.
7.3.
4.
5.
6.
Changing a Flat Tire
238
JACKING POINT
TOOL TRAY
To Next Page
Loading...
Need help?
General
