The instrument panel has many
indicators to give you important
information about your vehicle.
If this indicator comes on when the
engine is running, the battery is not
being charged. For more information,
see page .
See page .
This indicator has two functions:This indicator comes on when you
turn the ignition switch to ON (II). It
reminds you and your passengers to
fasten your seat belts. A beeper also
sounds if you have not fastened your
seat belt.
If you turn the ignition switch to ON
(II) before fastening your seat belt,
the beeper sounds and the indicator
flashes. If you do not fasten your
seat belt before the beeper stops, the
indicator stops flashing but remains
on.
If you continue driving without
fastening your seat belt, the beeper
sounds and the indicator flashes
again at regular intervals.
Itcomesonwhenyouturnthe
ignition switch to ON (II). It is a
reminder to check the parking
brake. A beeper sounds if you try
to drive with the parking brake not
fully released. Driving with the
parking brake not fully released
can damage the brakes and tires.
If it remains lit after you fully
release the parking brake while
the engine is running, or if it
comes on while driving, there
could be a problem with the brake
system. For more information, see
page .
The engine can be severely damaged
if this indicator flashes or stays on
when the engine is running. For
more information, see page .
1.
2.
247
248
248
250
Instrument Panel Lights
Seat Belt Reminder Light
Low Oil Pressure
Indicator
Charging System
Indicator
Malfunction Indicator
Lamp
Parking Brake and Brake
System Indicator
54
U.S. Canada
To Next Page
Loading...
Need help?
General
