A child seat with a tether can be
installed in any seating position in
the back seat, using one of the
anchorage points shown above.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
After properly securing the child
seat (see page ), lift the head
restraint, then route the tether
strap over the seat-back and
through the head restraint legs.
Tighten the strap according to the
seat maker’s instructions.
After properly securing the child
seat (see page ), route the
tether strap over the seat-back.
Followsteps2and3fromthe
previous column.Lift the anchor cover, then attach
the tether strap hook to the
anchor, making sure the strap is
not twisted.
1.
2.
3.
1.
2.
41 41
Installing a Child Seat with a
Tether
Installing a Child Seat
Using an Outer Anchor Using the Center Anchor
Driver and Passenger Safety
43
TETHER STRAP HOOK
TETHER STRAP HOOK
COVER
TETHER ANCHORAGE POINTS
Outer
CenterTETHER ANCHORAGE POINT
TETHER ANCHORAGE POINT
To Next Page
Loading...
Need help?
General
