Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Push and pull the child seat
forward and from side to side to
verify that it is secure.
Other LATCH-compatible seats have
a flexible-type connector as shown
above.
Lift the head restraint (see page
), then route the tether strap
through the legs of the head
restraint and over the seat-back,
making sure the strap is not
twisted.
Attach the tether strap hook to the
tether anchor, then tighten the
strap as instructed by the child
seat maker.
6.
4.
5.
7.
88
Installing a Child Seat
46
FLEXIBLE TYPE ANCHOR
TETHER STRAP HOOK
To Next Page
Loading...
Need help?
General
