Store the head restraints in the
storage compartment. Make sure
the head restraints are face up
(storing them face down can
damage the compartment or the
headrests), then insert the shafts
into the holes in the sides of the
storage compartment.
Use the ignition key to release the
seat belt from the detachable
anchor.
Pull on the handle on the back of the
seat-back, move the seat-back to the
desired position, and release the
handle. Let the seat-back latch in the
new position.
Remove the head restraints by
pushing the release buttons and
pulling the restraints out.
To get into the third row seats, pull
uptheleveronthesideofthe
passenger’s side second row seat-
back. The seat-back will tilt forward,
and the seat will slide forward.
After you return the seat-back to the
upright position, push the whole seat
backwards until it latches. Make
sure the seat is fully latched before
sitting in it.
1.
2.
3.
Seats
Folding the Third Row Seat
Adjusting the Third Row SeatThird Row Access
90
HANDLE
THIRD
SEAT
RELEASE LEVER
To Next Page
Loading...
