60 Navigation System
Map Scale
Rotate the Interface Dial knob or a voice command such as “Display 1/2 mile scale” (see page 147) to change the scale of the
map. Zooming in increases the detail, while zooming out gives you a view of a wider area. After changing the scale, give the
system a few moments to update the display.
Functions available at various map scales
NOTE:
• You can change between miles or kilometers in Setup (see Units on page 90).
• For information on the available voice commands, see Voice Command Index on page 146.
Map Scale (English and Metric)
For selecting units, see page 90.
1/20 mi.
1/8 mi. 1/4 mi. 1/2 mi. 1 mi. 2 mi. 5 mi. 15 mi. 50 mi. 150 mi. 350 mi.
80 m
200 m 400 m
800 m
1.6 km
3km 8km
24 km 80 km
240 km 560 km
POI icon symbols (like ATM) page 62 XX
Breadcrumbs (off-road tracking dots) page 67 XXXX
Freeway exit information icons page 62 XXX
One-way traffic icon page 62 X
Unverified road display (light brown) page 92 XXX
Map orientation “Heading up” page 61 XXXXX
Map orientation “North up” page 61 XXXXXXXXXXX
Map features (like park, golf course) page 54 XXXXXXXXXX
Avoid area shown on map page 96 XXX
Avoid area scales (when creating) page 96 XXX
Waypoint “flag” icons page 71 XXXXXXXXXXX
Traffic speed/incident page 22 XXXX
Driving to Your Destination
To Next Page
Loading...
Need help?
General
