▲
▼
▲▼
▲▼
CONTINUED
Here are the two custom settings for
the position setup:
MEMORY POSITION LINK
AUTO TILT & TELESCOPE
STEERING WHEEL
While ‘‘POSITION SETUP’’ is shown,
press the SEL/RESET button to
enter the customize mode.
Each time you press the INFO ( /
) button, the screen changes as
shown in the illustration. Press the
INFO ( / ) button until you see
the setting you want to customize,
then press the SEL/RESET button
to enter your selection.
Multi-Information Display
Position Setup
Instruments and Controls
97
SEL/RESET
BUTTON
INFO ( or )
BUTTON
07/07/09 09:34:37 31STX610 0102