＋
＋
−＋
−
The level of brightness is shown on
the multi-information display while
you adjust it. It goes out 5 seconds
after you finish adjusting.
To reduce glare at night, the
instrument panel illumination dims
when you turn the light switch to
or . To cancel the glare
reduction function, set the
brightness to the highest level, then
press the button. You will hear a
beep when it is canceled.
Youcancustomizewhentheglare
reduction function starts. To change
‘‘AUTO INTERIOR
ILLUMINATION’’, see page for
more information.Adjust the brightness of the
instrument panel by pressing the
or button. Press the button to
increase the brightness and the
button to decrease it. You can adjust
the brightness with the headlight
switch on or off.
95
Instrument Panel Brightness
Instruments and Controls
123
０７／０７／０９ ０９：３８：０５ ３１ＳＴＸ６１０ ０１２８
To Next Page
Loading...
Need help?
General
