Select the desired relock time by
pressing the INFO button, and enter
your selection by pressing the SEL/
RESET button.
If you fail to enter your selection,
you will see the above display for
several seconds, and the display goes
back to ‘‘CUSTOMIZE MENU.’’
Repeat the setup.
When your selection is entered, you
will see the above display for several
seconds, and then the display goes
back to ‘‘CUSTOMIZE MENU.’’
To exit ‘‘SECURITY RELOCK
TIMER,’’ press the INFO button
until you see ‘‘EXIT,’’ then press the
SEL/RESET button. The display
goes back to ‘‘CUSTOMIZE MENU.’’
Multi-Information Display
116
０７／０５／１７ １７：０２：０８ ３１ＳＥＡ６４０ ０１２１
To Next Page
Loading...
