Acura 2008 TSX User Manual

With ‘‘WIPER SETUP’’ shown on the
multi-information display, press the
SEL/RESET button on the steering
wheel. The display changes to
‘‘FRONT WIPER ACTION’’ as
shown above.
Press the SEL/RESET button, then
press the INFO button.
Each time you press the INFO
button, the display changes from
‘‘WITH VEH SPD,’’ to
‘‘INTERMITTENT,’’ and then to
‘‘EXIT.’’
Press the INFO button to select
‘‘WITH VEH SPD’’ or
‘‘INTERMITTENT,’’ and enter your
selection by pressing the SEL/
RESET button.
When ‘‘WIPER SETUP’’ is shown on
the multi-information display, the
action of the windshield wipers can
be changed. To do this, refer to the
following procedure.
CONTINUED
Wiper Setup
Front Wiper Action
Multi-Information Display
Instruments and Controls
117
０７／０５／１７ １７：０２：１７ ３１ＳＥＡ６４０ ０１２２

Acura 2008 TSX Specifications

General

Brand	Acura
Model	2008 TSX
Category	Automobile
Language	English