Navigation System 25
Getting Started
Listing Traffic Incidents from the
Map Menu
Select Traffic Incidents from the Map
menu. A list of all incidents within the
metro traffic area will be displayed. See
Map Menu on page 57.
No Traffic Incidents within 30 Miles
If you say “Display traffic incidents” or
select
Traffic Incidents
, but there are no
incidents within 30 miles of your current
location, the following screen will be
displayed.
Selecting an Incident Icon from the
Map Screen
Zoom in or out so that you are between
the 1/2 and 5 mile scales. (The map
must be on the 1/2 to 5 mile scales to
view the incident icons.) To view the
details of a specific incident, use the
Interface Dial to position the cursor
(round red circle) over the incident icon
you are interested in. Then push in on
the Interface Dial to view a pop-up
box summary describing the incident.
To see and hear the incident details,
push in on the Interface Dial a second
time. To return to your current position
map screen, say or select Return. To
continue viewing incidents in your
“scrolled to” location, press the
CANCEL button.
NOTE:
• Incident reports may be displayed on
roads that have no traffic flow data
available.
• Freeway incident reports can lag
behind the actual incident, or remain
displayed after an incident has
cleared. This is normal, and is
dependent on the reporting agency
and the speed at which the data is
updated.
• The displayed incidents may conflict
with information from other audio or
Internet-based traffic information
displays.
To Next Page
Loading...
Need help?
General
