Navigation System 61
Map Scale
Rotate the Interface Dial knob or say a voice command such as “Display 1/2 mile scale” (see page 154) to change the scale of
the map. Zooming in increases the detail, while zooming out gives you a view of a wider area. After changing the scale, give the
system a few moments to update the display.
Functions available at various map scales
NOTE:
• You can change between miles or kilometers in SETUP (see Units on page 99).
• For information on the available voice commands, see Voice Command Index on page 153.
Map Scale (English and Metric)
For selecting units, see page 99.
1/20 mi.
1/8 mi. 1/4 mi. 1/2 mi. 1 mi. 2 mi. 5 mi. 15 mi. 50 mi. 150 mi. 350 mi.
80 m 200 m 400 m 800 m
1.6 km
3 km 8 km 24 km 80 km
240 km 560 km
POI icon symbols (like ATM) page 63 XX
Breadcrumbs (off-road tracking dots)
page 69 XXXX
Freeway exit information icons page 63 XXX
One-way traffic icon page 63 X
Unverified road display (light brown)
page 101 XXX
Map orientation “Heading-up” page 62 XXXXX
Map orientation “North-up” page 62 XXXXXXXXXXX
Map features (like park, golf course)
page 55 XXXXXXXXXX
Avoid area shown on map page 105 XXX
Avoid area scales (when creating) page 105 XXX
Waypoint “flag” icons page 74 XXXXXXXXXXX
Traffic speed / incident page 21 XXXXXXX
Weather Information page 64 XXXXXXXXXXX
Driving to Your Destination
To Next Page
Loading...
Need help?
General
