68 Navigation System
Driving to Your Destination
For instance, let’s assume that your
school is not displayed on the map, and
you want to make sure that your settings
are correct. You would do the
following:
• First, you would ensure that the
“OTHER ICON” button on the Icon
bar is blue (see Icon Bar on page 67).
• Second, you select ICON OPTIONS
and verify that the school option is
also on (blue). This procedure is
explained below.
If you select Other Icons from the
Select category for icon settings
screen, the other icon options are
displayed:
In the example above, only ATM and
POST OFFICE are selected and will
show up on the map. To also see
SCHOOL on the map, this would need
to be turned on by first selecting it and
then pushing in on the Interface Dial
to select it so it appears as below.
Exit, and save your settings by moving
the Interface Dial to the right
(DONE).
NOTE:
• When viewing the map screen, you
can turn some icons on using voice
control.
• See Voice Command Index on
page 154 for the available “Display”
and “Hide” icon command.
To Next Page
Loading...
Need help?
General
