Making a Call
Press and release the HFL Talk button before you give a command.
1. Say “Call” and the phone
number.
2. Say “Call” or “Dial” to
begin the call.
3. The call is connected and
heard through the
speakers.
Receiving a Call
Press and release the HFL Talk button before you give a command.
1. A notification is heard, and
“INCOMING CALL” and the
phone number appear on
the MID.
2. Press the HFL Talk button to
accept the call.
3. Press the HFL Back button
to decline or end the call.
BLUETOOTH
®
HANDSFREELINK®
(Tech/Advance Package)
Allows you to place and receive phone calls through your vehicle's navigation and
audio systems. Visit www.acura.com/handsfreelink to check if your phone is
Bluetooth-compatible.
Press and release the Talk button before you give a command.
3. Say “Pair phone.”
2. Say “Setup Bluetooth
phone.”
4. HFL gives you a 4-digit pass-
key and begins to search
for your phone.
5. Put your phone in discovery
mode, and search for a
Bluetooth device.
6. When your phone prompts
you, input the 4-digit pass
key and connect to HFL.
* You can also use the Interface Dial to complete this procedure.
1. Press the Pick-Up button to
access the Cellular Phone
screen, and say “Phone setup.”
Pick-Up button: Answer an
incoming call, or go directly to the
Cellular Phone screen.
Hang-Up button: End a call or
decline a call.
Talk button: Give HFL commands.
Back button: Cancel a command
and return to the previous screen.
Pairing Your Phone
2322
10 MDX ATG:ATG_NEW STYLE 12/11/2009 11:34 AM Page 11
To Next Page
Loading...
Need help?
General
