3. Push USB/AUX to begin playing.
2. Connect the USB connector to your
iPod dock connector or flash drive.
1. Open the center console, and
pull out the USB adapter cable.
1. To record a song sample, press
and hold XM for about 2 seconds.
2. To replay stored information, push
the selector knob down.
3. Turn the selector knob to select
“NOTE,” then press ENTER.
4. Turn the selector knob to select a
sound file, then press ENTER. The
selected recording plays.
BLUETOOTH
®
AUDIO
(Tech/Advance Package)
Plays audio files from your Bluetooth-compatible phone through your vehicle’s audio
system. Visit www.acura.com/handsfreelink to check if this feature is available on
your phone.
iPod® or USB Flash Memory
Plays audio files from your compatible iPod or USB flash memory device through your
vehicle’s audio system.
Connecting and Playing Audio Files
Recording Song Samples
1. Make sure your phone is on and
paired to HandsFreeLink (See
HandsFreeLink).
• Press () or () on the audio
control panel.
• Press (+) or (-) on the remote
audio controls.
There are two ways to skip through audio files:
2. Press USB/AUX repeatedly until
“Bluetooth Audio” appears.
3. Press “play” on your phone;
sound is redirected to the audio
system.
*iPod is a registered trademark of Apple Computer, Inc., registered in the U.S. and other countries. iPod not included.
Playing Bluetooth Audio Files
Playing
Bluetooth Audio Files
Note Function (Tech/Advance Package)
Use the Note function to store up to 30 ten-second recordings of songs and song
information from XM Radio.
2726
10 MDX ATG:ATG_NEW STYLE 12/11/2009 11:36 AM Page 13
To Next Page
Loading...
Need help?
General
