Insert the new bulb into the hole,
and turn it one-quarter turn
clockwise to lock it in place.
Turn on the headlights to test the
new bulb.
Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Push the bulb in slightly, and turn
it counterclockwise.
Remove the left or right side
engine compartment cover from
thesideyouareworkingonby
carefully pulling the cover out (see
page ).
Reinstall the engine compartment
side cover.
(Driver’s side)
Reinstall the battery cover.
2.
1.
4.
5.
6.
7.
8.
3.
451
Lights
Replacing a Front Turn Signal
Light Bulb
464
BULB SOCKET
０９／０４／０２ １９：３８：２１ ３１ＳＪＡ６５０ ０４６９
To Next Page
Loading...
Need help?
General
