1110
R E V E R S E T I L T D O O R M I R R O R
H o w I t W o r k s
When you shift into Reverse (R), the passenger’s outside door mirror tilts down slightly
to improve your view as you parallel park. Shifting out of Reverse returns the tilted
mirror to its original position.
• To tilt the passenger’s
door mirror, move the
mirror selector switch
to the right (R)
position when in
Reverse.
• To turn the feature
off, move the switch
to the middle or left
(L) position.
R E A R V I E W C A M E R A ( T e c h n o l o g y P a c k a g e )
For added convenience, the area behind your vehicle is displayed to help
you navigate while backing up.
• When you shift into Reverse, a real-time image of
the area behind your vehicle is shown in the
navigation display.
• Yellow parking guidelines also appear to help you
judge distance.
• Adjust the screen brightness by turning the
Interface Dial.
• The display turns off when you shift out of Reverse.
H o w I t W o r k s
H O M E L I N K ®
Press and hold the button on the
remote and the HomeLink button at
the same time. Then, while
continuing to hold the HomeLink
button, press and release the button
on the remote every 2 seconds.
Does the LED blink at a faster rate within 20
seconds?
Press and hold
the HomeLink
button again.
Training
complete
YESNO
HomeLink indicator
flashes for 2 seconds,
then remains on.
HomeLink LED
remains on.
YESNO
YESNO
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.
1
Press and hold the desired
HomeLink button and the button on
the remote transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
2
a
The remote has a rolling code.
Press the “learn” button on the
remote-controlled device (e.g.,
garage door opener).
Press the programmed HomeLink
button again; the remote-controlled
device should operate.
Within 30 seconds, press and
hold the programmed HomeLink
button for 2 seconds.
a
Press and hold the programmed
HomeLink button for about a
second.
Does the device (garage door opener) work?
3
b
4
5
T r a i n i n g a B u t t o n
The HomeLink Universal Transceiver built into your vehicle can be programmed to
operate up to three remote-controlled devices around your home, such as garage
doors, lighting, or home security systems.
If you have any problems programming HomeLink, see the owner’s manual
included with the device you are trying to program, call HomeLink at
(800) 355-3515, or visit www.homelink.com.
12 TSX 4D ATG:ATG_NEW STYLE 6/1/2011 2:14 PM Page 7
To Next Page
Loading...
Need help?
General
