What does 'No station list on device' mean on Acura Car Navigation system?
The error message 'No station list on device' on your Acura Car Navigation system appears when there are no stations in Pandora®. Use your device to create a station.
What does 'The display temperature is too high!' mean on my Acura Car Navigation system?
The error message 'The display temperature is too high!' on your Acura Car Navigation system indicates that, for protection, the display will shut down.
Why does my Acura Car Navigation system clock keep changing?
The clock setting on your Acura Car Navigation system is automatically updated based on your GPS location. If you live and work on the boundary between two time zones, you can turn off this feature.
How to adjust brightness of the rear camera image on Acura Car Navigation system?
To adjust the brightness of the rear camera image on your Acura Car Navigation system, rotate the Interface Dial while the camera image is displayed. Note that this adjustment does not affect the navigation screen brightness settings.
What does 'Heat Error - High temperature' mean on Acura Car Navigation system?
The 'Heat Error - High temperature' message on your Acura Car Navigation system indicates that you should turn the audio system off and allow the player to cool down until the error message is cleared.
Why is Acura Car Navigation system rear camera image display delayed?
This is normal behavior for the Acura Car Navigation system. When shifting into or out of Reverse, you may experience a delay while the screen image switches between the navigation screen and the rear camera image.
Why did Acura Car Navigation system clock switch by one hour for no apparent reason?
You may be driving near a time zone boundary, which caused your Acura Car Navigation system clock to switch by one hour.
What does 'Cannot access the HDD due to low atmospheric pressure' mean on Acura Car Navigation system?
The error message 'Cannot access the HDD due to low atmospheric pressure' on your Acura Car Navigation system indicates that the HDD is inoperable due to low atmospheric pressure. Move your vehicle to a place where the atmospheric pressure is high.
What to do if Acura Car Navigation system shows 'BAD DISC Servo error'?
If your Acura Car Navigation system displays the error message 'BAD DISC Servo error', press the E (Eject) button to remove the disc, and check if the error message is cleared.
What does 'Skip limit reached' mean on Acura Car Navigation system?
The error message 'Skip limit reached' on your Acura Car Navigation system means that you have exceeded the skip limit. You can skip again after the skip limit is removed. Try again later.
Precautions related to accessories affecting the navigation system.
General introduction to the navigation system's capabilities.
Procedures for starting the navigation system and initial confirmation.
Using voice commands to operate navigation, audio, and climate control systems.
Adjusting display brightness, contrast, black level, and volume settings.
Managing address books, home addresses, and PIN protection.
Methods to enter a destination for route guidance.
Process for calculating routes and viewing different route options.
Following route guidance, using map menus, and adjusting map display.
Altering routes by adding waypoints or changing the final destination.
Playing FM/AM radio, SiriusXM® radio, and audio CDs.
Playing music from HDD, iPod®, USB drives, and Bluetooth® devices.
Adjusting sound settings and using audio remote controls.
Pairing a phone and configuring HFL settings like PIN and auto transfer.
Procedures for making calls via phonebook/history and handling incoming calls.
Receiving, reading, and replying to text messages via the system.
How to view new messages and understand message categories.
Available options for messages and scheduling dealer appointments.
Managing calendar entries and using the calculator for conversions.
Viewing system info, map updates, and accessing roadside assistance.
Using the rear camera display, guide lines, and view modes.
Resolving issues with map display, voice recognition, and destination entry.
Addressing problems with route guidance, traffic information, and rerouting.
Troubleshooting map errors, display issues, and rear camera problems.
Understanding and resolving various system error messages.
Initial setup procedures and understanding system limitations like GPS accuracy.
Resources for resolving issues, reporting errors, and contacting support.
Information on map coverage areas, updates, copyrights, and user agreements.
Commands usable from any screen and those specific to navigation functions.
Commands for managing audio playback and cellular phone features.
Voice commands for system settings and interacting with screen elements.
General| Brand | Acura |
|---|---|
| Model | 2015 RDX |
| Category | Automobile |
| Language | English |
To Next Page
