*1:On the left: Models with full color display
On the right: Models without full color display
Indicator Name On/Blinking Explanation Message
*1
Malfunction
Indicator Lamp
●
Comes on when you set the
power mode to ON, and goes
off either when the engine
starts or after several seconds
if the engine is not started. If
“readiness codes” have not
been set, it blinks five times
before it goes off.
●
Comes on if there is a
problem with the emissions
control system.
●
Blinks when a misfire in the
engine’s cylinders is detected.
●
Readiness codes are part of the on board
diagnostics for the emissions control
systems.
2 Testing of Readiness Codes P. 535
●
Comes on while driving - Have your
vehicle checked by a dealer.
●
Blinks while driving - Stop in a safe place
where there are no flammable objects. Stop
the engine for 10 minutes or more, and
wait for it to cool down. Then, take the
vehicle to a dealer.
2 If the Malfunction Indicator Lamp
Comes On or Blinks P. 513
Charging
System
Indicator
●
Comes on when you set the
power mode to ON, and goes
off when the engine starts.
●
Comes on when the battery is
not charging.
●
Comes on while driving - Turn off the
climate control system and rear defogger in
order to reduce electricity consumption.
2 If the Charging System Indicator
Comes On P. 512
16 ACURA TLX-31TZ36100.book 74 ページ ２０１５年８月２６日 水曜日 午後１時５４分
To Next Page
Loading...
