Put a cloth on the edge of the Shift
Lock Release slot cover next to
the shift lever.
Use a small flat-tipped screwdriver
or small metal plate (neither are
included in the tool kit) to remove
the cover. Carefully pry on the
edge of the cover.
Insert a screwdriver in the Shift
Lock Release slot.
Push down on the screwdriver
while you press the release button
and move the shift lever out of
Park to Neutral.
To release the Reverse Lockout,
move the shift lever from Neutral
to Reverse, then to Park.
Remove the screwdriver from the
shift lock release slot, then install
anewcover.
Depress the brake pedal and
restart the engine.
If you need to use the Shift Lock
Release, it means your vehicle is
developing a problem. Have the
vehicle checked by your Acura
dealer.
3. 4.
5.
6.
Automatic Transmission
Driving
216
CCOOVVEERR
SSHHIIFFTT LLOOCCKK RREELLEEAASSEE SSLLOOTT
01/09/07 12:29:32 31S3V610_221
To Next Page
Loading...
Need help?
General
